The new Arctic Star Refrigeration dryer range treats compressed air efficiently; meeting the user needs and eliminating the problems associated with wet, untreated air in compressed air systems. Due to the unique design of the heat exchanger, the dryers are not considered to be pressure vessels. Low operating costs, modern design and up to 65% less refrigerant is what makes this dryer unique in its field.

• Scroll compressors

• Plate heat exchanger

• Environmentally friendly refrigerants

• Micro processor controlled

• Capacities 12-6600 m³/hr

The built-in X grade filter efficiently removes any dirt particles, condensed water and oil aerosols down to a filtration level of 0.01 micron leaving the air entering the dryer ready to be dried. For flows up to 85m³/h. All the parts are built into a module, the control valve in a base plate, and the non-return valve and regeneration system in a cover plate. The compact absorber vessels and the direct mounted pre and after filters combine to give high performance with minimum space requirements.
The principle features are:

• Extremely compact.

• Complete with pre and after filter.

• Suitable for installation needing class 1 compressed air.

• Electronic control is standard.

• Dew point control (optional)

• An option is available to link the dryer to the compressor stop/start control for greater economy.

• Vibrofil desiccant filling system ensures correct desiccant density.

• Special distribution plate for maximum flow through the desiccant.

• Leak free change over valve

The HDK/CNG series high-pressure dryers can be used throughout industry, especially in cases where gases and compressed air need drying to pressures of up to 350 bar and pressure dew points down to -70°C.
ZANDER high pressure dryers have proven success in the following applications:

• power stations and substations

• energy supply

• petroleum and gas industry

• offshore

• piping

• drilling technology

• exploration

• aeronautical and marine technology

• fire brigades

• emergency services

• generation of breathing air

• natural gas filling stations

Zander KEN-MT Complete ready-to-install heatless dryers for capacities from 200 - 5,600m³/h. Available with ecotronic control for reduced operation costs. Pressure dew point down to -70°C.
The principle features are:

• Compact design.

• Complete with pre and after filter (up to KEN 1400)

• Electronic control standard.

• An option is available to link the dryer to the compressor stop/start control for greater economy.

• Special desiccant filling system ensures correct desiccant density

• Wedge wire sieve for maximum flow through the desiccant.

A ZANDER patented vacuum heat regenerated absorption dryer.

• No purge air losses and stable dew points

• Pressure dew points down to -70°C

• Long desiccant service life due lower regeneration temperatures

• Air drying capacities from 500 -14.000 m³/h.

• "Sensotronic" dew point control system for optimum operational economy

• Higher flows available on request

Other Dryer Types Available:

• Heat of compression

• Blower Purge

Suppliers of:

• Activated Alumina

• Molecular Sieve

• Silica Gel

• Actuated Carbon